Walchem WPHPW100PNE pH Controller with Probe & Tee

$985.27

  • Model: WPHPW100PNE

  • Function: pH monitoring and control for water treatment and industrial applications

  • pH Probe: High-quality probe included for accurate, real-time pH measurement

  • Tee Assembly: Includes necessary tee assembly for easy installation and integration into the system

  • Automatic pH Adjustment: Adjusts chemical dosing automatically to maintain optimal pH levels

  • User-Friendly Display: Easy-to-read display for status monitoring and pH readings

  • Versatile Applications: Ideal for cooling towers, industrial water treatment, swimming pools, and other water systems

  • Durable Design: Built for long-term performance in harsh environments

  • Power Supply: Compatible with standard 115/230V AC systems

Item No: WPHPW100PNE pH Category:
Description
  • Large display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Multiple language support allows simple setup no matter where your business takes you
  • The third control relay allows the controller to be used in more places than other entry level products

Complete flexibility in the function of each relay

  • Bleed on conductivity
  • Bleed time proportional to makeup water volume
  • Boiler Blowdown on conductivity using intermittent sampling
  • Feed in proportion to bleed time
  • Feed time proportional to makeup water volume
  • Feed as a percentage of elapsed time
  • Biocide timer with pre-bleed and post-feed bleed lockout options

Optional analog (4-20 mA) output for recording, datalogging or connection to building energy management systems

Specifications
Inputs

Power 100-240 VAC, 50 or 60 Hz, 7A max – Fuse: 6.3 Amp

Digital Input Signals (2) – State-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. Typical response time: <2 seconds Devices supported: Any isolated dry contact (i.e. relay, reed switch) Types: Interlock

Low Speed Counter-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. 0-10Hz, 50 msec minimum pulse width Devices supported: Any device with isolated open drain, open collector, transistor or reed switch Types: Contacting Flowmeter

High-Speed Counter-Type Electrical: Optically-isolated input. Provides isolated 9V power. Current consumption when input is closed: 2.3 mA nominal. 0-500Hz, 1.00 msec minimum pulse width Devices supported: Any device with isolated open drain, open collector, transistor or reed switch Types: Paddlewheel Flowmeter


Outputs

Powered Mechanical Relays (0 or 3 model code dependent) Pre-powered on circuit board switching line voltage. 6 A (resistive), 1/8 HP (93W) per relay All three relays are fused together as one group, total current for this group must not exceed 6A

Dry contact mechanical relays (0 or 3 model code dependent) 6 A (resistive), 1/8 HP (93W) per relay Dry contact relays are not fuse protected

4 – 20 mA (0 or 1 model code dependent) Internally powered Fully isolated 600 Ohm max resistive load Resolution .0015% of span Accuracy ± 0.5% of reading

Mechanical (Controller) Enclosure: Polycarbonate Enclosure Rating: NEMA 4X (IP65) Display: 128 x 64 graphic backlit display Ambient Temperature: -4 to 131°F (-20 to 55°C) Shipping Temperature: -4 to 176°F (-20 to 80°C) Shipping weight: 22 lbs (10 kg) (approximately) varies with model

Agency Certifications Safety: UL 61010-1:2012, 3rd Edition CSA C22.2 No.61010-1:2012, 3rd Edition IEC 61010-1:2010 3rd Edition EN 61010-1:2010 3rd Edition EMC: IEC 61326-1:2012 EN 61326-1:2013

Note: For EN61000-4-6, EN61000-4-3 the controller met performance criteria B. This equipment is suitable for use in establishments other than domestic and those directly connected to a low voltage (100-240 VAC) power supply network which supplies buildings used for domestic purposes.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Walchem WPHPW100PNE pH Controller with Probe & Tee”

Your email address will not be published. Required fields are marked *